Thrust roller bearings is used to endure both the axial and radial combined load, but axial load takes the main part, but radial load should be less than 55% of axial load. Compare to other thrust roller bearings, such kind bearings have lower friction factor, high rotation speed and function of self-aligning. The rollers of 29000 series bearings are unsymmetrical form sphere rollers, it can minis the relative glide between rollers and rollaway nest, moreover, it has a great amount rollers with longer length and bigger diameter, together with high carrying capacity, it usually adopt oil lubrication, but it also use grease lubrication during very few slow speed. When choose type during design, we should choose following types in prior, 80000 series thrust cylindrical roller bearings, 90000 series thrust taper roller bearings and AXK series thrust needle roller bearings, both these can endure unilateralism axial load, meanwhile its carrying capacity of axial load is much more bigger than thrust ball bearings, together with the advantage of high rigidity and small holding space in axes. Thrust cylindrical roller bearings and thrust needle roller bearings are suitable to use in the situation of low speed, the rotation speed of thrust taper roller bearings is much quicker than thrust cylindrical roller bearings.
Note: this bearing can endure bigger unilateralism axial load, and limited unilateralism displacement, together with low rotation speed.
Thrust spherical roller bearings( 29000 series 292**/293**/294** )
Note: this bearing is used to suffer from radial and axial load, the axial load take the main part, but the radial load should not excess the 55% of axial load, it can also endure unilateralism axial load and limited the one-way axial displacement of axes (cruse)
Thrust Tapered roller bearings :994**
thrust taper roller bearing can bear single direction axial load, strict bearing single direction axial displacement, axial load capacity more than thrust ball bearing, limit speed slightly above thrust cylindrical roller bearing.
The small single direction tapered roller thrust bearings are used almost exclusively for the kingpin bearing arrangement of commercial vehicles. They have a full complement of rollers and are held together by a sheet steel cover. Most of these bearings are fitted with rubbing seals of wear and oil-resistant nitrile (NBR) rubber. They are lubricated for life with a multi-purpose grease and require no maintenance. There are several designs which differ only in the design of the housing washer and the cover.
The larger single direction bearings differ in the execution of the washers; some have dimensionally identical shaft and housing washers and some have washers of different design.
Thrust needle roller bearings and retainer components( AXK series)
Note: Suitable to the occasion of low speed
This bearing apply to oil rig, ocean-going freighter screw shaft, helldivers, Overhead crane, large tower crane turntable, miser turntable ,heavy-duty machine, vertical-type drill and so on.